Description
Ensure optimum performance and long-term water repellency on your Diamon-Fusion® (or DFI) treated shower doors and other glass surfaces with Revitalizer™ coating.
Once applied to the glass, Revitalizer™ rejuvenates the existing coating, helping it to once again seal the surface and make it water repellent. The protective sealant makes the glass easier to clean, and resistant to stains caused by hard water, soap scum, and outside pollutants. And like other DFI protective coatings, Revitalizer™ is also UV-resistant and eco-friendly, so no harsh chemical cleaners are needed to care for the glass.
So, whether you want to maintain the hydrophobic (water repellent) effects on your shower glass, windows, glass railings, or granite, tile, and quartz, Revitalizer™ can get the job done. As long as they were previously treated with Diamon-Fusion® or any DFI protective coating, you are good to go.
The coating is formulated using the same nanotechnology seen in Diamon-Fusion® and is extremely simple to apply — available in either a towelette or spray bottle application.
- Designed for DFI treated glass surfaces
- Available in three (3) different sizes
- Coverage varies on product type
- Restores water repellent nature of glass
- Makes glass cleaning easier and less frequent
- Protects against hard water stains
- Keeps glass looking cleaner for longer
- Ensures long-lasting performance
- No cure time – coating instantly dries
Application Instructions
Read the instructions below or download the PDF Guide.
- Clean and dry the surface that is to be treated – the cleaner the surface, the better the coating.
- Once thoroughly clean and dry, apply the Revitalizer™ protective coating in a well-ventilated area. Spray the coating as needed and wipe with a microfiber towel using firm circular, overlapping motions, going over the entire area at least twice.
- Remove any excess solution by sprinkling the glass with water and wiping the surface with a clean dry cloth or paper towel until glass is clear and sparkling.
- Reapply the coating as needed or when water repellency begins to wane.
Important: For Revitalizer™ NanoPax® applications, use firm circular, overlapping motions, going over the entire surface at least twice and only unfold the towelette as needed.
Important: If the glass to be treated is heavily stained, DFI recommends using the Express Care Kit or Restoration Powder™, along with a white scrubber pad, to remove any stains and prep the surface for the Revitalizer™ coating application.
Important: In less-ventilated areas, apply Revitalizer™ treatment in small sections.
Related Products
DFI Clear-Fusion V Surface Protective Coating DIY Kit
DFI
DFI Clear-Fusion V Shower Glass Protective Coating (4oz/33oz)
DFI
DFI Express Care Kit (ECKIT)
DFI
DFI Glass Rescue Surface Cleaner (4oz)
DFI